Thursday, February 28, 2013
My fiancé, Stephen, introduced me to brewing a short while after we met. Before him, I never would have noticed how many different tastes a beer could have, good and bad. Our first batch of beer we brewed together had a really heavy metallic flavor (not including the explosive Mr. Beer incident, which is another story). It was much like sucking on a penny. I don't know, maybe there's someone out there who would love to drink liquid copper, but personally I like my beer to taste like the lightly hopped stout I tried to brew in the first place. Our metallic beer had us pouring over literature, the Internet, and brewing forums searching for the cause of this mystery taste. In the process, we learned about many other off-flavors, including green apple, astringent, nail polish, rotten egg, skunky and metallic.
Green apple flavor sounds the most palatable of the five, but I've never had the opportunity to have green apple flavored beer. According to Parker in the article "Understanding Yeast Off-Flavors", a green apple taste results from too much of the compound acetaldehyde. Normally the yeast consumes acetaldehyde. However, if there is a problem with the quality of the yeast or if too much sugar is added to the wort, it might not do its job completely, leaving a cider taste to the finished product. An apple taste can also mean the beer is too young and the yeast has not had time to metabolize the acetaldehyde. (Zymergy, Nov/Dec 2012)(Palmer, 2006).
Astringent taste brings to mind nail polish to me, but apparently there is a difference in astringent tastes and nail polish tastes. Astringent is described by Palmer as being like “sucking on a tea bag. It is dry, kind of powdery”. Extra tannins are the most likely culprits for causing astringent tastes. Excess tannins can be a result of: over-steeping grains, having a mash pH of more than 6, alkaline water (in cases with hoppy pale beers), using too-hot water, or over-sparging the mash (Palmer, 255-256).
Nail polish smell or taste is probably caused by ethyl acetate. Although ethyl acetate is a member of the sometimes-desired ester family, it is unpleasant in high quantities. Ethyl acetate can be a result of: excess wild yeasts, high temperature during fermentation, under-pitching, and unnecessary oxygenation (Parker, 26).
There is really nothing like popping open a cold beer (or warm, if you are like Stephen) and taking a deep, long whiff of rotten eggs. Really, it sounds awful. Luckily, I’ve never had the pleasure. If you are brewing a lager, don’t worry. Just let it sit for a couple of weeks and try it again. Many lager yeasts actually produce hydrogen sulfide, which is the culprit for the rotten egg smell, during fermentation. It should go away in time. If you are not brewing a lager, then you may have a bacterial infection (Palmer, 252). Go to the doctor and get a prescription…ba dum ching! But seriously, sanitize, sanitize, sanitize!
Recently I had a craving for Newcastle. I bought a 6 pack, brought it home, popped it open, took a drink, and it was suddenly as if I’d been sprayed by a skunk. The suspect? Newcastle’s clear bottles. Brown bottles protect the contents from UV rays, but green and clear bottles leave the beer open to lighting. Sunlight and fluorescent lights cause a photochemical reaction in the hops, resulting in a skunky smell and taste (259). A little bit of skunky taste in a light beer is fine to me, especially a Mexican beer. It’s probably even intended to taste slightly skunky. But if your beer smells like road kill, you might think about switching to brown bottles or storing your clear ones in a dark place.
Finally, for our main problem: Metallic tastes. It turns out that there are many different causes of this problem. It could be because of the metal from the pot you were mashing in leaching into the mash. It could be from malts that weren’t stored correctly. It could be from high iron content in the water (258). I have also heard that it can be caused by high chlorine content, which would make sense considering we’d been cleaning all of our supplies with bleach.
Whatever the cause of our metallic flavors, it has persisted to a small degree. We’ve bought filtered water, stopped cleaning with bleach and switched solely to StarSan, and our malts our always stored in a safe place. We have not had any of the other tastes I’ve mentioned as of yet, although Stephen says our new Irish red has a very slight cidery taste. Hopefully our research will prevent any unpleasant surprises in the future.
Palmer, John J. How to Brew: Everything You Need to Know to Brew Beer Right the First Time. Boulder, CO: Brewers Publications, 2006. Print.
Parker, Neva. Understanding Yeast Off Flavors. Boulder, CO: Zymurgy, Nov/Dec 2012. Pgs 25-27. Print.
Thank you for visiting our blog page. Be sure to come by the store!
2300 Bell Street Suite 16
Thursday, February 7, 2013
We carry everything you need to brew your own beer, whether you're brewing all-grain mash, extract, or partial mash.
- White Labs liquid yeast
- dry yeast
- all the hops you demand
- the malts you need
- a wide array of cleansers and sanitizers
- clarifying agents
- water treatment and brew chemicals
- specialty grains to make your beer stand out above the rest.
Whether you're brewing on a budget or semi-pro, we cater to you.We have fermentors, kits and ingredients to start out the beginners or for seasoned brewers to build their master home brew system.
We also carry a wide assortment of wine supplies and wine kits. Special orders are always welcome.
Unsure how to get started? Just ask! And for the true beer nerds, we have literature to feed your brain and build your skills.
We are passionate about what we do because we brew just like you.
Come in and find out about our daily, weekly, and monthly specials.
During our grand opening, come in and sign up to win some of our merchandise.
We will be located at 2300 Bell street, suite 16. Please check back for the date of our grand opening.